Metal Building Venting

Steel Buildings Components Roof Systems
Continuous Ridge Vents used on Steel Buildings roofing systems roofs conform to high standards and specifications which have been developed, tested and proven over many years. They provide an excellent value for the user.
Canopies are constructed of 26 gauge material around an 18 gauge galvanized frame.

Metal Building ridge vent
Steel Buildings Ridge Vent

Telescoping channels mount between girts on the interior of the building. Channels will accommodate girt spacing of up to 7 ft. 6 inches. 1/2″ threaded rod connects channels to canopy frame. All hardware necessary for installation is included.

CONSTRUCTION

  • Durable 26 gauge exterior
  • Internal components of 24, 20 and 18 gauge die formed sheet metal
    and machined parts

SIZES

  • 10 ft. sections of 9″ throat and 12″ throat
  • Other sizes available upon request

FINISHES

  • Pre-painted or galvalume is standard
  • Other materials and finishes available upon request

DESIGN SPECIFICATIONS

  • Fully protected by 4 x 4 mesh galvanized hardware cloth
  • Easy-moving damper opens to any degree, from fully open to completely closed
  • Aerodynamically proportioned to exclude weather
 Steel Buildings Roofing Vents

FLORIDA APPROVED  CONTINUOUS RIDGE VENTS

Florida Approved Ridge Vents

Building Components for Roof Systems

 Steel Buildings Venting System 

Performance testing was conducted by Architectural Testing Inc. on the Flat Skirt

steel buildings continuous ridge vent
Steel Buildings Continuous Ridge Vent

Continuous Ridge Ventilator (ATI 60793.01-801-44 R1).

Used on metal roofing systems roofs conform to high standards and specifications which have been developed, tested and proven over many years. They provide an excellent value for the user.

 CONSTRUCTION

  • Durable 26 gauge exterior
  • Internal components of 24 gauge steel, reinforced bracing and
    additional fasteners

SIZES

  • 10 ft. sections of 9″ throat and 12″ throat
  • Other sizes available upon request

FINISHES

  • Pre-painted or galvalume is standard
  • Other materials and finishes available upon request

DESIGN SPECIFICATIONS

  • Fully protected by 4 x 4 mesh galvanized hardware cloth
  • Easy-moving damper opens to any degree, from fully open to completely closed
  • Aerodynamically proportioned to exclude weather
 Steel Building Venting Systems

Low Profile Florida Approved Floating Ridge Vents

Building Components for Roof Systems

Performance testing was conducted by Architectural Testing Inc. on the Ridgelinne Ridge Ventilator (ATI 60793.01-801-44 R1).

Steel Buildings Components Roof Systems Continuous Ridge Vents used on Steel Buildings roofing systems roofs conform to high standards and specifications which have been developed, tested and proven over many years. They provide an excellent value for the user. Canopies are constructed of 26 gauge material around an 18 gauge galvanized frame. Steel Buildings Ridge Vent Telescoping channels mount between girts on the interior of the building. Channels will accommodate girt spacing of up to 7 ft. 6 inches. 1/2″ threaded rod connects channels to canopy frame. All hardware necessary for installation is included. CONSTRUCTION Durable 26 gauge exterior Internal components of 24, 20 and 18 gauge die formed sheet metal and machined parts SIZES 10 ft. sections of 9″ throat and 12″ throat Other sizes available upon request FINISHES Pre-painted or galvalume is standard Other materials and finishes available upon request DESIGN SPECIFICATIONS Fully protected by 4 x 4 mesh galvanized hardware cloth Easy-moving damper opens to any degree, from fully open to completely closed Aerodynamically proportioned to exclude weather  Steel Buildings Roofing Vents FLORIDA APPROVED  CONTINUOUS RIDGE VENTS Florida Approved Ridge Vents Building Components for Roof Systems  Steel Buildings Venting System  Performance testing was conducted by Architectural Testing Inc. on the Flat Skirt Steel Buildings Continuous Ridge Vent Continuous Ridge Ventilator (ATI 60793.01-801-44 R1). Used on metal roofing systems roofs conform to high standards and specifications which have been developed, tested and proven over many years. They provide an excellent value for the user.  CONSTRUCTION Durable 26 gauge exterior Internal components of 24 gauge steel, reinforced bracing and additional fasteners SIZES 10 ft. sections of 9″ throat and 12″ throat Other sizes available upon request FINISHES Pre-painted or galvalume is standard Other materials and finishes available upon request DESIGN SPECIFICATIONS Fully protected by 4 x 4 mesh galvanized hardware cloth Easy-moving damper opens to any degree, from fully open to completely closed Aerodynamically proportioned to exclude weather  Steel Building Venting Systems Low Profile Florida Approved Floating Ridge Vents Building Components for Roof Systems Performance testing was conducted by Architectural Testing Inc. on the Ridgelinne Ridge Ventilator (ATI 60793.01-801-44 R1). Steel Buildings Low Profile Ridge Vent Canopies are constructed of 26 gauge material around an 18 gauge galvanized frame. Telescoping channels mount between girts on the interior of the building. Channels will accommodate girt spacing of up to 7 ft. 6 inches. 1/2″ threaded rod connects channels to canopy frame. All hardware necessary for installation is included. CONSTRUCTION Durable 26 gauge exterior Internal components of 24 gauge steel, reinforced bracing and additional fasteners SIZES 10 ft. sections Other sizes available upon request FINISHES Pre-painted or galvalume is standard Other materials and finishes available upon request DESIGN SPECIFICATIONS Aerodynamically proportioned to exclude weather  
Steel Buildings Low Profile Ridge Vent

Canopies are constructed of 26 gauge material around an 18 gauge galvanized frame. Telescoping channels mount between girts on the interior of the building. Channels will accommodate girt spacing of up to 7 ft. 6 inches. 1/2″ threaded rod connects channels to canopy frame. All hardware necessary for installation is included.

CONSTRUCTION

  • Durable 26 gauge exterior
  • Internal components of 24 gauge steel, reinforced bracing and
    additional fasteners

SIZES

  • 10 ft. sections
  • Other sizes available upon request

FINISHES

  • Pre-painted or galvalume is standard
  • Other materials and finishes available upon request

DESIGN SPECIFICATIONS

  • Aerodynamically proportioned to exclude weather
 Get a quote image