What materials are used to make the structures?The majority of components utilized in our frames are made of 2 1/4″ by 2 1/4″ galvanized steel tubing for 12 gauge buildings and 2 1/2″ by 2 1/2″ for 14 gauge buildings.
Question
What size’s is available for metal Buildings carports and garages? For our carports, garages, and metal buildings, any size needed can be supplied, go to our Free Quote Area and fill in the sizes, and request a quote, or call 386 277 2851 and we will accommodate your needs!
Question
What methods are used to anchor the carports and garages? There are three anchoring types. If the structure were to be mounted to a concrete pad or footing, then traditional concrete wedge anchors would be used.We offer a 36 inch rebar anchor that is intended for use when a structure is mounted directly to dirt or gravel surface. On our certified buildings, a helical mobile home style anchor is used. On non-certified structures, these can be purchased as an optional item. Call 1-386-277-2851 or Fax 1-386-277-2852 for more information.
Question
How long does it take from the time I place my order until the time the building is installed?The majority of our installations are completed in two to Four weeks or less!
Question
What are the tallest legs that can be ordered?The tallest legs that can be ordered are 12 feet. Anything taller than 12 feet can be ordered by special approval only. Our installation professionals are equipped with the tools to handle installations of up to 12 feet.
Question
What preparation should be completed before my building is installed? Insure that the site designated for product installation is a flat and square surface. In order to provide you with affordable products, with quick installation, site preparation, as well as building permits, are the responsibility of the customer. The customer is responsible for any local permits, covenant searches, rights of way, set-back restrictions, etc.
Question
Why aren’t the prices listed online? Prices vary from state to state. Several factors govern why our prices vary from state to state. Shipping and freight from our distribution centers, construction requirements, which factor in snow load requirements in northern states, wind and anchoring system requirements in hurricane and tornado prone areas, are all factors that result in price variances from state to state.
Question
How do we handle the financial part?We require fifteen percent down to get the contract moving, then we order the item and when it is complety installed, the balance is due. The fifteen percent is payable in cash, check, money order or cashier check, when the job is finished, cash, check, money order, cashier check, or credit card.
Question
Why can’t I order online? Check with your local dealer 1-386-277-2851 or fax 1-386-277-2852 First and foremost our intent is to please our customers, we would prefer that you go to our quote form and fill it in, that way we can contact you with your quote, and make sure you are getting everything you want.
Question
Why should I consider a vertical roof versus a horizontal roof?As displayed on our carport and garage sections of the website, the ridges of the steel panels in a horizontal roof run parallel to the sides and ridges of the carport or garage. Water, snow, etc., will drain to the front and back of the building towards the door openings. If the building is perfectly level, water will tend to pond on a horizontally installed roof. On a vertical roof, the ridges of the steel panels run from the top of the carport or garage to the sides. This roof configuration displaces water, snow, etc., much more efficiently, and water will not pond on the roof. Water will also drain away from the door openings (unless the doors are installed on the sides of the carports or garages).
Question
What are the on center spacing of the frame legs/bows? As a general rule, the spacing of the frame legs/bows are 4 feet or 5 feet on center.
Question
What is the height in the center of the building if I order a certain height leg?You can calculate this measurement. For example, if the carport/garage is a Standard Style Double unit, 20 feet wide with 7 feet legs, add 3′ 0″ to the 7 feet leg height for a total center height of 10′.
Question
Can I just buy a standard steel building that’s pre-designed?Yes and No. At J,C,s Metal Building Sales, some of our smaller buildings are pre-designed and are appropriate for any climate in the U.S.We have pre-designed buildings in larger sizes as well, but we need to make slight modifications to them so that the frames are the right strength to meet the Building Code requirements for your area. That means that if you live in an area that experiences high winds or an area where there are heavy snow loads in the winter, you’ll have a building that’s designed to resist those loads. In addition, your local authority may have special planning requirements or building bylaws that we need to take into consideration
Question
Do I really need insulation? What is it good for?Insulation is not required but it is highly recommended. 1-386-277-2851 If you are heating or cooling a building insulation will save you on electricity expenses by preventing heat transfer in or out of your building. Insulation is also good for noise reduction and condensation control.
Question
What purpose do the wind girts on a metal building serve?The wind girts on a metal building support the metal siding. In technical terms, they transfer the wind load from the siding to the vertical supports. The wind girts are needed because, even though our metal siding is very strong and durable, it is not rigid enough to span the entire vertical height of a building without buckling in high winds or in the event of an impact. The metal panels need some back-up. The wind girts are useful for other things, too. They can support insulation and interior finishes, and they help resist horizontal wind forces from the adjacent sides of the building as well as wind that hits them head-on.
Question
How do I get a building quote?J.C.s Metal Building offers FREE quotes with the use of our simple building data input system. Get your quote from our online system if you’re looking for a metal building. To give you an exact figure, we’ll need to know about the types, sizes and locations of the windows and doors. We’ll also need to know whether or not you’re going to insulate it. If you have a complex project that you need to have estimated, then send us an e-mail with a sketch and/or a detailed description, or contact an J.C.s Metal Building representative, our phone number: 1-386-277-2851
Question
How can I replace the steel siding or roof on my steel building?If you own an older steel building and the siding or the roof has been damaged or has a major problem with corrosion, then you can usually replace the siding or roofing without needing to replace the structure. We can work with you to figure out exactly what’s required, and we can almost certainly provide it to you at a reasonable price. Because most of our buildings are custom designed, it is not a problem for us to fabricate roofing or siding to unusual specifications
Question
What kind of panel options do I have?Metal panels vary in rib design, gauge, and color depending on the desired design and application of the building. Custom finishes can be added to panels to mimic the look of almost any other type of building material, including stone, brick, wood, concrete.
Question
What roof is better for a concrete block garage: asphalt shingles on wood or metal roofing on metal framing?Looking for the best roof for a concrete block garage? Many homeowners and business owners find uses for concrete block garages, mostly because they are so easy to create. However, the roof presents a persistent challenge that must be overcome if you want to have the safest and most secure concrete block garage possible. For different concrete block garages, there are different approaches and considerations when considering the best roof options. Some people prefer to match the appearance of their garage roof to their house, and that’s a good reason to choose a wood or metal structure with standard sheathing and asphalt shingles rather than a metal roof. Depending on where your concrete block garage is located, matching the roof to your home’s roof is almost essential. Imagine what it would look like if both were street facing and the roofs did not match? It would take away from the appearance and curb appeal of both your home and your garage.
Question
What information do I need to get a quote?A general steel building quote can be created with the length, width and height dimensions of a building. To get an exact quote of a building we will need to determine the design details of the building. This includes things like doors, windows, panel options, insulation etc.
Question
What equipment do I need to erect a metal building? To construct a small metal building such as a shed, you’ll need: Wrenches to tighten the bolts A cordless drill for the self-tapping screws A long level to make sure that everything is straight A spud wrench or large screwdriver to line up the bolt holes on the main beams Larger buildings may require rented construction equipment, such as a scissor lift or a crane lift. In addition, if you plan to build the foundation yourself, you’ll need additional tools and equipment. Talk to the engineers at J.C.s 1-386-277-2851 to get an idea of what might be needed, given the size and height of your metal building.
Question
What is the maximum span of a metal building? Rigid frame clearspan buildings that do not have interior columns can span up to 200 ft wide, whereas rigid frame multispan buildings that have interior columns can span over 400 feet wide. The length of building is unlimited, with exception to certain applications.